METTLER-TOLEDO ASN9000 Touch Digitizer Glass Replacement

An METTLER TOLEDO ASN9000 MMI Touch Screen scale optimal location will ensure accurate and reliable operation of the balance. The METTLER TOLEDO ASN9000 Touch Screen Terminal surface must be able to safely take the weight of the balance when fully loaded. The following local conditions must be observed:

Important
If the balance is not horizontal at the outset, it must be leveled during commissioning.
• Operate the balance only indoors and at an altitude of less than 4000 m above sea level.
• Before switching on the balance, allow all its parts to reach room temperature (+5 to 40 °C). Make sure that the relative humidity is between 10% and 80% and that non-condensing conditions are met.
• The Mettler-Toledo ASN9000 Touch Digitizer Glass scale power plug must be easily accessible.
• Firm, horizontal location as free from vibrations as possible.
• Avoid direct sunlight.
• No excessive temperature fluctuations.
• No powerful drafts.
• Surroundings as free from dust as possible.