6FC5203-0AF05-0AB0 Siemens OP015A Membrane Keypad and Touch Glass
6FC5203-0AF05-0AB0 Siemens OP015A Membrane Keypad and Touch Glass
6FC5203-0AF05-0AB0 Siemens OP015A Membrane Keypad and Touch Glass
6FC5203-0AF05-0AB0 Siemens OP015A Membrane Keypad and Touch Glass
6FC5203-0AF05-0AB0 Siemens OP015A Membrane Keypad and Touch Glass
6FC5203-0AF05-0AB0 Siemens OP015A Membrane Keypad and Touch Glass
modelo
6FC5203-0AF05-0AB0

propriedade

Brand
Siemens
Warranty
6 Months
Product Line
Siemens OP015A Operator Panel
Supply
Sinumer HMI OP015A Membrane Keyboard Plastic Case
size
15 inch

Avaliação

Descrição

6FC5203-0AF05-0AB0 Siemens SINUMERIK HMI OP015A OPERATOR PANEL Operator Panel Keypad, Touch Screen Monitor and Plastic Case Housing Repair Replacement

Order each part separately is available

6FC52030AF050AB0 Siemens SINUMERIK HMI OP015A OPERATOR PANEL Membrane Switch, Touch Screen Film and Plastic Case Repair Replacement

Front and rear side of Siemens 6FC5203-0AF05-0AB0 Touch Screen Film Membrane Keypad Switch
The front interface is USB 1.1 to connect an external keyboard or mouse. Note that the electromagnetic compatibility of commercially available peripheral devices operated via the USB port of 6FC5 203-0AF05-0AB0 is usually rated for office use only. For industrial use, components with a higher degree of certification are recommended. The rear interface of 6FC52030AF050AB0 Touch Membrane Switch Membrane has two cables for connecting the PCU: I/O USB cable K1 (ribbon cable): All signals that are used for the display interface and the connection of operator panel fronts (e.g.supply voltages) and Display cable K2.

Preparation for mounting of 6FC52030AF050AB0 Keyboard Membrane Touchscreen
Thanks to the tension jacks on the OP 015A 6FC5203-0AF05-0AB0 Membrane Keypad Switch Touch Screen Film , drill-holes or screw holes are not needed. This retaining method also affords a degree of protection IP65 (but only in conjunction with a circumferential seal and when the protective USB cap is fitted). If you want to combine the OP 015A 6FC5 203-0AF05-0AB0 Operator Keyboard Touch Screen Display with a PCU and possibly a direct control key module, assemble the components before installing them on the mounting wall.

Mounting Siemens 6FC5203-0AF05-0AB0 Touch Panel Membrane Switch on the mounting wall
The clearance at the rear of the PCU must be at least 10 mm to ensure sufficient ventilation. Permitted mounting position: deviating by up to 5 from the vertical. This value can be further restricted by installed components of 6FC52030AF050AB0 HMI Touch Glass Terminal Keypad (PCU, video link receiver,...).





Specifications:

The table below describes the parameters of the 6FC5203-0AF05-0AB0 Siemens OP015A HMI Parts.

Attachment: Tension Jacks
Resolution: 1024 x 768 Pixels
Flat Screen: 15'' TFT
Protection: IP 65
Product Line: Siemens OP015A
Mounting Depth: Slight
Part Number: 6FC52030AF050AB0
Integrated Mouse: Yes
Design as Touch Screen: Yes
Design of Display: TFT Display


Related Simatic OP015A Part No. :

SINUMERIK Operator panel OP015A Description Inventory status
6FC5203-0AF50-0AA0 Siemens SINUMERIK HMI OP015 Terminal Keypad Repair In Stock
6FC5203-0AF50-0DA0 Siemens OP015-434C Membrane Switch Replacement Available Now
6FC5203-0AF50-5AA0 Siemens Operator Keyboard Repair In Stock
6FC5203-0AF50-6AA0 Siemens SINUMERIK HMI OP015 Keypad Membrane Replacement In Stock
6FC5203-0AF53-1AB2 Siemens TP015AT Membrane Keypad Switch Repair Available Now
6FC5203-0AF53-1AB3 Siemens SINUMERIK Keyboard Membrane Replacement In Stock
6FC5210-0DF22-2AA0 Siemens SINUMERIK HMI OP015 Terminal Keypad Repair Available Now
6FC5248-0AF03-0AA0 Siemens OP015 Switch Membrane Repair Available Now
6FC5248-0AF25-0AA0 SINUMERIK HMI OP015 Membrane Keypad Replacement In Stock
6FC5303-0AF14-0AA0 Siemens OP015 Membrane Keypad Touch Screen Glass Replacement Available Now
6FC5303-0AF50-5AA0 SINUMERIK OP015 Membrane Keyboard Repair In Stock
6FC5303-0AF50-6AA0 Siemens OP015 Terminal Keypad Replacement Available Now
Siemens Operator panel OP015A Description Inventory status


Siemens OP015A series HMI Manuals PDF Download:

  • SINUMERIK 840D sl828D Universal Operating Manual
  • SINUMERIK 840D/840Di/810D Operator Components Manual


  • FAQ:

    Question: What are the individual parts for the OP 015A 6FC5203-0AF05-0AB0?

    Answer: Operator panel front, backlight with backlight inverter, display support with keyboard controller (rear side), LCD unit, cap for the USB port and tension jacks.


    Question: How to assembling an OP 015A 6FC5 203-0AF05-0AB0 and a PCU?

    Answer: When combining an OP 015A 6FC52030AF050AB0 and PCU, it is advisable to assemble them prior to installation in an assembly panel.


    Question: How can I cool the machine of 6FC52030AF050AB0?

    Answer: You can cool the machine of 6FC5 203-0AF05-0AB0 by natural convection.

    Common misspellings: 

    FC5203-0AF05-0AB0
    6FC203-0AF05-0AB0
    6FC5203-0AF05-0A0B
    6FC5203-0AF05-0AB00
    6FC5203-0AF05-0AB00